unisonic technologies co., ltd dtc115t npn silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r206-063,ba npn digital transistor (built- in bias resistors) ? features * built-in bias resistors that im plies easy on/off applications. * the bias resistors are thin-film resistors with complete isolation to allow negative input. ? equivalent circuit ? ordering information order number package pin assignment packing lead free halogen free 1 2 3 DTC115TL-AE3-6-R DTC115TL-AE3-6-R sot-23 e b c tape reel note: pin assignment: e: emitte r, b: base, c: collector ? marking
dtc115t npn silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r206-063,ba ? absolute maximum ratings (t a =25c) parameter symbol ratings unit collector-base voltage v cbo 50 v collector-emitter voltage v ceo 50 v emitter-base voltage v ebo 5 v collector current i c 100 ma collector power dissipation p c 200 mw junction temperature t j 150 c storage temperature t stg -55 ~ +150 c note absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical specifications (t a =25c, unless others specified) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =50 a 50 v collector-emitter breakdown voltage bv ceo i c =1ma 50 v emitter-base breakdown voltage bv ebo i e =50 a 5 v collector cutoff current i cbo v cb =50v 0.5 a emitter cutoff current i ebo v eb =4v 0.5 a collector-emitter satu ration voltage v ce ( sat ) i c =1ma, i b =0.1ma 0.3 v dc current transfer ratio h fe v ce =5v, i c =1ma 100 250 600 input resistance r1 70 100 130 k ? transition frequency f t v ce =10v, i e =-5ma, f=100mhz 250 mh z note: transition frequency of the device utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
